DENON AVR-1082 Receiver - 6.1, NO HDMI - 2 Zones, Fully Tested - Phono. This popular well built Denon AVR 6.1 Surround Receiver is equipped with a large transformer and Discrete Power Amps delivers very good sound capabilities. Since it was built in the early 2000s it is equipped with Multi Zone, Sub Out, and other analog inputs such as Phono Preamp for turntables. This unit was fully recently serviced, cleaned and tested by DALAUDIO and found to be in excellent working order. The sale includes the original remote, original printed manual, AM/FM Antennas, and several RCA Cables are included in this sale. Please see the photos as this unit is clean with only a very small mark on the top edge of the unit (left of center facing unit).
Cash Sale, No Holds. Call for Text for Pick-up - NO Shipping
More about the Unit: This 2003 unit is ideal for a vintage screen TV without HDMI, or as just a large Stereo or 5.1 Stereo system. The AVR-1082 provides two power amps for the Surround Back channels for a total of 7 fully-discrete amps of equal power. This configuration lets you take advantage of DTS-ES, Dolby Digital EX, DVD-Audio, and SACD program sources. Dolby Pro Logic II let you hear 2-channel stereo sources in realistic 5.1 channel surround sound.
Multi Zone: The AVR-1082 includes Multi Zone Output and Power Amp Assign functions that let you output different sources to more than one room.
Power: The AVR-1082 features an equal power 7-channel amplifier section, with identical amplifier design on all 7 channels, with high current discrete output devices on all channels. Each of the 7 amplifier channels is rated at 150 watts, into 6 ohms. Decrete, Equal Power Seven Amplifier Channels Front 150w + 150w (6 ohms, 1kHz, 0.7% THD) Center 150w (6 ohms, 1kHz, 0.7% THD) Surround 150w + 150w (6 ohms, 1kHz, 0.7% THD) Surround Back 150w + 150w (6 ohms, 1kHz, 0.7% THD) - At 8 Ohms its 110 WPC all the way around.
Stereo: You can listen to 2-channel stereo recordings in 5.1-channel surround playback.The Dolby Pro Logic II decoder reproduces dynamic 5.1-channel surround sound not only from normal 5.1-channel DVD but from 2-channel sources such as videos and CDs, too. Dolby Pro Logic II uses matrix decoding technology that has been dramatically improved over Pro Logic. With Pro Logic II, for instance, the Surround (Rear) channels are in stereo (only mono with Pro Logic) and playback covers the full frequency range (only up to 7 kHz with Pro Logic). These improvements let you enjoy a wide variety of 2-channel sources with the exciting effects of 5.1- channel surround sound. In Dolby Pro Logic II, there is a Movie mode (*1) that creates a sound space suitable for movies, a Music mode that does the same for music, and a Pro Logic emulation feature that reproduces sound effects in the way that conventional Pro Logic does.
Other important features: 96 kHz, 24-bit Audio D/A Converters
Inputs: 9 Analog Inputs: Phono, CD, Tuner, DVD, VDP, TV/DBS, VCR-1,VCR-2/V.AUX, CDR/Tape
8-Ch Analog EXT. Input...Front L/R, Center, Surround L/R, Surround L/R, Subwoofer
Digital (optical) Input......Optical x 3, Digital (coaxial) Input..... Coaxial x 1.
Outputs: Analog PRE Out Terminals.....Front L/R, Center, Surround L/R, Subwoofer, Surround Back L/R
3 Analog REC Out Terminals.....VCR-1, VCR-2/V.AUX, CDR/Tape, 1 Analog Multi Zone Output ....L/R
1 Digital (Optical) Output ....OPTICAL x 1
Video Inputs: 2 Sets Component Video Input ...... DVD, TV/DBS
5 Sets Composite Input ......... .. DVD, VDP, TV/DBS, VCR-1, VCR-2,V.
AUX 5 Sets S-Video Input .............. DVD, VDP, TV/DBS, VCR-1, VCR-2/V.AUX
Video Outputs 1 Component Video Output ..... MONITOR 3 Composite Outputs............VCR-1, VCR-2/V.AUX, Monitor 3 S-Video Outputs..............VCR-1, VCR-2/V.AUX, Monitor
Speaker load impedance: 6Ω to 16Ω
Digital inputs: coaxial, optical
Dimensions: 17.25" W x 16.25" D x 6.75" H
Weight: 38 lbs
Accessories: RC-883/RC-884 remote control
Year: 2003