Rotel RB-960BX Stereo Power Amplifier In Exc. Cond. Mono Bridgeable- This Rotel amplifier produces a slean steady power at 60W RMS per channel. It was recently cleaned and serviced by DALAUDIO LLC and is in excellent working order. The physical condition is also very good. It's is a capable unit with the ability to drive most period loudspeakers to rock loud levels in typical rooms. It has a sound that will sound familiar with the sound of the best amps out there with a moderate price. This Rotel is for the budget-minded music lover who wants a good, solid amplifier that's not going to break the bank.
 
These are priced each unit at the above price. If you want both $475.
 
Cash Sale No Holds Call or Text - NO shipping- Available for local pickup only, happy to demonstrate clarity with notice. 
 
This Rotel amp is an AC-coupled design, similar to say Adcom of the same period. The Rotel RB-960BX uses a 10µF/50V Rubycon electrolytic cap, shunted to ground with a 27.4k resistor. The amps DC-blocking filter has a response of –3dB at around half a hertz. It has very well constructed dual-mono power supplies;, each channel having its own large power transformer and two 10,000µF/50V Reservoir Capacitors, one pair for each 47 VDC power-supply rail. The Rotel sports a triple-Darlington complementary push-pull output stage, with two pairs of bipolar output devices per channel.
 
If you buy two, the Rotel is bridgeable to mono configuration by configuring a switch on the back panel. In bridge mode, it's rated at 180W into 8 ohms! Quite a difference. The sound is musical and pleasant throughout the overall range.
 
Description: stereo solid-state amplifier.
Output power: 60W into 8 ohms (17.8dBW).
Bridged mono output: 180W into 8 ohms (22.6dBW).
Peak current: 30A into 0.1 ohm, 10µs.
Input sensitivity: 1V RMS.
Input impedance: 27k ohms.
Frequency response: 15Hz–100kHz, –1dB.
S/N ratio: 116dB.
Power consumption: 300W.
Dimensions: 17 3/8" W by 3 5/8" H by 13 3/16" D.
Weight: 20.2 lbs.
Price: $370 Retail